Website maintenance is scheduled for Monday, Jan. 16, 2017 and Tuesday, Jan. 17, 2017. Please excuse any interruptions.

Ocean Optics
Worldwide Headquarters
Dunedin, Florida, USA

+1 727-733-2447

info@oceanoptics.com

Sales, Service
& Support Facility
Duiven, The Netherlands

+31 26-319-0500

info@oceanoptics.eu

Ocean Optics GmbH Sales,
Service & Support Facility
Ostfildern, Germany

+49 711-34-16-96-0

info@oceanoptics.eu

Sales Support
for the
United Kingdom

+44 1865-811118

info@oceanoptics.eu

Sales, Service
& Support Facilities
Shanghai, PRC – Beijing, PRC

+86 21-6295-6600

asiasales@oceanoptics.com

Close
Google Translate:  Chinese (Simplified)EnglishFrenchGermanItalianSpanish
Home > Measurement Techniques > Color Measurement

Color Measurement

Reflectance

This reflectance setup includes a customized shield for the probe.

Color is a fickle thing, as anyone who has ordered an item online only to have it arrive in a completely different shade will tell you. Similarly, two articles of clothing matched in the closet can suddenly appear to clash in daylight.

Color brings beauty to our world, but can be infuriating in its apparent subjectivity. Why is it impossible to remember the color of an object when our eyes are capable of detecting the tiniest differences?

Quantifying color can be equally frustrating until you understand the factors that affect how it is perceived. That chameleon-like sweater? It’s not in your imagination. Read on and we’ll try to put it all in black & white for you.

Advantages

  • Quantitative: Far more accurate than human eye, with detailed spectral information.
  • Flexible: Data acquired can be used to calculate multiple color parameters, varying factors like the observer and illuminant, even at a later date.
  • Comprehensive & multi-modal: Other metrics can be simultaneously measured, like brightness and output power for efficiency calculations, or other spectroscopic techniques.
  • Objective: Does not depend on a particular set of filters or an algorithm applied at time of measurement.
  • Remote access: Fiber coupling allows measurement in hostile environments without impact to the spectrometer.

Applications

Other Common Applications

  • Electronics manufacturing: binning of LEDs, quality control of LCDs and plasma screens
  • Lighting: monitoring lamps used in horticulture, hydroponics, street lighting, advertising signage and hospitality lighting; characterizing light sources for CCT, CRI
  • Medical diagnostics: assessment of tissue for skin cancer
  • Food & agriculture: standardizing orange juice color, assessment of raw cotton quality
  • Biology: measurement of leaf disease states, organism coloring as a function of environment, impact of plumage on bird behavior, correlations between frog skin color and pollution levels
  • Industry: standardizing anodization, quality control in polymer manufacture, curing of ink and paint
  • Art and textiles: mapping the “pixels” in a painting, quality control of fabrics, paint matching systems at hardware stores

What Is Color, Really?

Color is the sensation produced when light at visible wavelengths falls on the human eye, specifically from 380 – 780 nm. Do dogs see in color? Yes, but not the kind of colors we see. That’s because they are physiologically different from us.

CIE_Photopic_Response_Curve

Cone cells don’t actually detect color directly. They respond only to the energy they absorb. A single cone cell can tell only whether two objects reflect the same amount of light, not whether they are the same color. The magic comes in their variety. The human eye has three different types of cones, each with its own unique spectral response function. It is the combined and contrasting responses of these three types of photoreceptors that create the impression of a single color in the human brain.

Human Spectral Sensitivity to Color

The spectral responses of the three cone types correspond roughly to red, green, and blue – what we consider to be the primary colors in an additive color model. Inspired by this trichromatic response of the eye, many color spaces have developed which use three values to describe color: RGB, XYZ, L*a*b*, and uvw, to name just a few.

Though the individual values in these color spaces don’t correlate directly to the response of a particular type of cone cell in the eye, each color space has a place in defining the endless array of colors in a particular field or industry. Some color spaces weight one parameter to describe the luminance or “lightness” of a color, while the other parameters capture the hue.

Other color spaces use a single parameter to describe one key quality of an emissive light source, like how it compares to an old fashioned tungsten wire bulb, or how well it “brings out” color in other objects.

Why Use a Spectrometer to Measure Color?

More information. More flexibility. In fact, it seems a little odd not to use a spectrometer to measure color, but it is actually common practice.

Simple color meters use red, green and blue filters in combination with diodes or sensor pixels for measurement. More advanced systems use tristimulus filters that mimic the CIE color matching functions. These work well for incandescent light sources, but are less accurate for LEDs. Handheld color meters may measure up to 20 wavelength bands, but this is not enough for research or high-accuracy measurements.

To detect small color changes, very high color resolution is necessary. By capturing the complete spectrum, the color measurement made by a spectrometer allows careful and detailed analysis of data. Color meters and analyzers based on filters or detection over specific bands simply leave a lot of information on the table – information that can be used to better inform the color measurement.

Some color analyzers are also strongly dependent on lighting conditions, since objects tend to appear different colors under different illumination. With the right lighting, two objects can appear to be identical in color even if the reflected spectral power distributions differ, an effect called metamerism. If the lighting changes, however, the colors can look significantly different. This makes controlled lighting conditions essential to consistent results.

When color measurements are made with a spectrometer, a full reflected or emissive spectrum is the starting point for all calculations. That allows the data to be analyzed in different ways, and even recalculated at a later date to change the observer, the illuminant, or the color space. It offers maximum flexibility with the same high accuracy as if the calculation had been performed that way initially.

Featured Products for Emissive Color Measurement:

Emissive Color Measurement

TORUS-25-OSF Torus spectrometer (360-825 nm) has low stray light and high thermal stability. This version includes a 25 µm slit and order-sorting filter, but your choice of optical bench accessories very much depends on the LED wavelengths you are measuring.
FOIS-1 Integrating sphere that collects light from emission sources such as LEDs
LED-PS Power supply powers the LED, displays the LED drive current and holds the LED in place
QP400-2-VIS-NIR Premium-grade patch cord directs light collected at integrating sphere to the spectrometer
HL-3-INT-CAL Radiometrically calibrated light source designed for use with an integrating sphere
OceanView Spectroscopy software

Featured Products for Color Measurement:

Reflected Color Measurement

TORUS-50 Holographic concave diffraction grating spectrometer (360-825 nm) with 50 µm entrance slit
HL-2000 Tungsten halogen light source (360-2400 nm)
QR400-7-VIS-NIR Reflection probe (6-around-1 fiber design), optimized for VIS-NIR response, 2 m length
RPH-1 Fixture for holding 1/4″ (6.35 mm) diameter reflection probes
WS-1-SL Diffuse reflectance standard has 99% reflectivity from 400-1500 nm
OceanView Spectroscopy software

What is a reflected color measurement?
How do I optimize a reflection measurement for color?
What reflectance standard is best for reflected color?
What is emissive color measurement?
How do I optimize an irradiance measurement for color?
Calculating color
How do I take the best dark measurement?
Color testing in fabric Color Measurement

Measuring Color Purity of Pyrotechnics

Flame Spectrometer

Flame Spectrometer

High Thermal Stability, Interchangeable Slits
Reflectance Probe

Reflectance Probe

Diffuse Reflectance Probe with Integrated Light Source
DynaCup

DynaCup

Rotating Sample Stage
Spark-VIS

Spark-VIS

Ultra-compact Visible Spectral Sensor
RPH Reflection Probe Holders

RPH Reflection Probe Holders

Fixtures for Mounting Probes in Reflection Setups
USB2000+ (Custom)

USB2000+ (Custom)

Custom Configured Spectrometer for Setup Flexibility
STS Developers Kit

STS Developers Kit

Connect, Code, Create with New Sensing Tools
USB4000 (Custom)

USB4000 (Custom)

Custom Configured for Maximum Flexibility
Maya LSL Spectrometer

Maya LSL Spectrometer

Low Stray Light with High Sensitivity
HR4000 (Custom)

HR4000 (Custom)

High Resolution Spectrometer for Maximum Flexibility
EMBED Spectrometer

EMBED Spectrometer

Robust, Stable Spectrometer for OEM Applications
USB2000+VIS-NIR

USB2000+VIS-NIR

Application-ready Spectrometer for the Visible and near-IR
USB4000-VIS-NIR

USB4000-VIS-NIR

Application-ready Spectrometer for the Visible and near-IR
USB2000+VIS-NIR-ES

USB2000+VIS-NIR-ES

Application-ready Spectrometer for the visible and near-IR with Enhanced Sensitivity
USB4000-VIS-NIR-ES

USB4000-VIS-NIR-ES

Application-ready Spectrometer for the visible and near-IR with Enhanced Sensitivity
HG-1 Calibration Source

HG-1 Calibration Source

Mercury Argon Calibration Source
KR-1

KR-1

Krypton Calibration Source
AR-1

AR-1

Argon Calibration Source
XE-1

XE-1

Xenon Calibration Source
NE-1

NE-1

Neon Calibration Source
FHS-UV

FHS-UV

In-Line Filter Holder
Optical Filters

Optical Filters

OF2 Filters for High-pass, Bandpass and Balancing Requirements
INLINE-TTL Electronic Shutter

INLINE-TTL Electronic Shutter

Take Dark Measurements without Disturbing Spectrometer Setups
MPM-2000 Optical Multiplexer

MPM-2000 Optical Multiplexer

Routing Light in Your Spectrometer Setup
Hydra Light Mixer

Hydra Light Mixer

Fiber-coupled Accessory for Light Mixing